制袋机
调机:
The machine:
1、设备保养:对各注油点、导辊、滑块、齿轮、链条等需要润滑的部位进行注油保养。
Equipment maintenance: oil filling point, guide roller, slide block, gear, chain, etc.
2、低速调机:
2 、low speed switch:
2.1--调整前电眼的灵敏度,找出跟踪基准色块,并设定袋长尺寸。
2.1 - adjust the sensitivity of the previous electric eye to find the tracking base color and set the size of the bag.
2.2--确定双向调
2.2 -- a two-way tone is determined
节辊处电眼的跟踪方式(单、双电眼跟踪或边、线方式跟踪)合理调节电眼的位置和灵敏度。
The position and sensitivity of the electrical eye are adjusted by the eye tracking mode (single, double eye tracking or line tracking).
2.3--检查是否已到达制袋的设定温度
2.3 - check to see if the set temperature of the bag is reached
2.4--调整调节辊位置,使图案前后左右位置对正,图案居中。
2.4 -- adjust the position of the roll, make the shape and position of the pattern before and after the pattern center.
2.5--调整纵刀位置,温度和压力,使纵向热封边平实、牢固。
2.5 -- adjust the position of the knife, temperature and pressure, make the longitudinal heat sealing edge smooth and firm.
2.6--调整横刀位置,温度和压力,使横向热封边平实、牢固。
2.6 -- adjust the position, temperature and pressure of the cross blade, making the horizontal heat sealing side solid and firm.