| 制袋机装箱操作规程 |
| 添加时间：2019/11/20 15:57:37 浏览次数： |
| 1）装箱：机台人员将本工序产品进行整理，选出有质量缺陷的不合格品，把合格品捆扎好，交给机台质检员进行检验。 1) packing: the machine personnel shall sort out the products in this process, select the unqualified products with quality defects, bind the qualified products and submit them to the machine quality inspector for inspection. 2）检验：由机台质检员对数量、质量逐扎进行检验，待数量质量均合格后，按要求装入箱内，放入装箱单；择出的不合格产品放置在有“不合格”标识的纸箱内。 2) inspection: the machine quality inspector shall inspect the quantity and quality one by one. After the quantity and quality are all qualified, it shall be packed into the box as required and put into the packing list; the selected unqualified products shall be placed in the box with the "unqualified" mark. 3）机台人员将当班产品送入外观质检室。 3) the machine personnel shall send the products on duty to the appearance inspection room. 4）总质检员对送检产品按规定比例进行抽检验，检验合格后进行打包入库。 4) the general quality inspector shall carry out sampling inspection on the products submitted for inspection according to the specified proportion, and pack and put them into storage after passing the inspection. |
| 上一页 造成平口机、R机封口不牢固常见因素有哪些 |
| 下一页 无纺布制袋机物料被自动计量后充填到制成的袋内 |
Copyright © 技术支持：遨游网络